Making My Own Ultrasonic Cleaner

In this video I will show you how I made my own ultrasonic cleaner and test if it will work.

I started with this metal container, any sheet metal container, like a used pan should work. I took the measurements and constructed a frame to hold the container and allow me to lift it easily. I added a panel to install my electronics onto. The box for teh electronics was installed on the panel. In my case the circuit board fit perfectly inside the box so it didn't need fastening.

The ultrasonic genetor was glue to the middle of the bottom of the container. I might later add a second generator and move them and space them equally. The control board has capability to run 2 of those generators. The electronics are very simple. I added teh simple schematic to the video. A button was installed to turn the device on and off.

Thanks for watching:

Here are some of the parts and tools:
Steel container: https://amzn.to/3jHInEr
Ultrasonic Generator kit: https://amzn.to/37hzFuc
Epoxy glue: https://amzn.to/3JNMj17
Pair Wire: https://amzn.to/3dSXNUi
Soldering station: https://amzn.to/3xrpv25