How to build a DIY log store + Plans + Tools and Materials Lists

For more details on this build click here: https://thediyfix.com/diy-log-store/

In this video you can follow along as I build a DIY log store from scratch. The video is step by step, meaning you should be able to follow along and build your own log store.
There are also a couple of technical drawings in the video for the main frames.

The process is very simple, and the measurements ensure that there is very little waste. This means you only pay for the wood you need for the project. Which is significantly cheaper than buying one from a store.
Materials needed for DIY log store:

• 5 lengths sawn treated timber – 75 x 47mm – 3600mm (C16 eased edge)
• 12 lengths sawn treated timber – 100 x 20mm – 3600mm
• 1 length treated timber batten – 50 x 25mm – 3600mm
• 0.5 sheets Hardwood faced plywood - 610 x 2440mm
• Roll of roof felt
• 1 tin of Blackjack roof felt adhesive
• Box of 100 - 100mm multi-purpose screws
• Box of 100 - 50mm green decking screws
• Box of heavy duty 10mm staples

Tools required:

• Chop saw – If you don’t have a chop saw cuts can be done by hand but it will take longer
• Cordless drill/driver
• Tape measure
• Pencil
• Square
• Bevel
• Staple gun
• Large stiff paint brush

I honestly believe that anyone, with even a basic knowledge of DIY could build this. Just follow the simple steps outlined in the video to build your very own, home-made wood store.