كيف تصمم
At LearnElectrics we are sometimes asked about the wiring connections inside a garage consumer unit or mini consumer unit as they are sometimes called.
In this video we will look at just how this is done and provide the information in easy to follow step by step drawings of each stage so that a fuller and more interesting understanding is achieved.
These small consumer units are very versatile and their uses are almost limitless. If installed correctly they can be beneficial to any installation where a small, localised, and self-contained installation is required with local isolation of a particular part of a building.
You may also find the following videos from LearnElectrics useful …
CABLES LENGTH CALCULATIONS and R1+R2
https://www.youtube.com/watch?v=Qq_9MNH8XxU
MATCHING CABLE SIZE TO CIRCUIT BREAKER and FUSE SIZE
https://www.youtube.com/watch?v=VtTUkUpQ-Rc
SAFE ISOLATION PROCEDURE
https://www.youtube.com/watch?v=HyDrsXiGgcc
EIC COMPLETION - ELECTRICAL INSTALLATION CERTIFICATE
https://www.youtube.com/watch?v=lvoZJrBZkS0
This video is No.122 on our YouTube channel where we have videos on a wide range of electrical topics.
To see a full list of all our LearnElectrics videos, click on the link below.
https://www.youtube.com/channe....l/UCYaJQnpO4XAp0yCgq
You can also view all our videos by typing LearnElectrics all one word into the YouTube search bar.
Always work safely, electricity can be dangerous. If you are unsure, stop and seek advice.
This video is provided for guidance only. Every electrical situation is different, please check and ensure that you are applying this learning information to your own individual circumstances correctly and safely. If in doubt, stop and seek competent advice.
Here is a quick video on how you can adjust your front wheel toe alignment yourself and save a bunch of money. You should always do an alignment after you replace any of your steering components, inner or outer tie rods, rack n pinion etc but if all you need to adjust is the toe on your front wheel here is how you can perform the procedure yourself with very little effort.
Please Consider Supporting My Channel at : https://www.patreon.com/RnWYou may also find these other video's helpful:
How to replace inner and outer tie rod ends: http://youtu.be/PQuTwWwmW6w
How to test and inspect your tie rod ends: http://youtu.be/ZTn7EUmm6zY
How to Replace an AC Compressor clutch and bearing: http://youtu.be/04c1MPq0HGo
How to perform a parasitic draw test on your battery: http://youtu.be/eXX8TfzRAKk
How to diagnose vibration or shaking issues at highway speeds:
http://youtu.be/2LSC5-bARg0
Disclaimer:
Due to factors beyond the control of Ratchetsand Wrenches, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Ratchetsand Wrenches assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Ratchetsand Wrenches, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Ratchetsand Wrenches.
Changing your electric scooter tube or tyre for the first time can be frustrating. I share some tips in this video to make things much easier.
Other helpful videos https://youtube.com/playlist?l....ist=PLOIER5h7JLythi9
⚡️ Watch my most popular videos after this https://youtube.com/playlist?list=PLOIER5h7JLysEBv5Uljrwi1OzbLaQgZjP&si=57bFoTnvWn1J3FpR
———————————————————
🔹 My tools, riding gear + upgrades https://movelectrics.com/gear-list/
🔷 My FB group for anything electric: https://bit.ly/2NMeXIY
———————————————————
Sound effects/Music Licence: https://www.epidemicsound.com/....?BuCBWfZGyJBvKEZVbnL
Get Epidemicsounds here: https://bit.ly/2WglTia
This video is original, made by myself and I go through a detailed process of shooting and producing original content. All opinions I share are my own.
DISCLAIMER: As an Amazon Associate I earn from qualifying purchases.
DISCLAIMER: This video and description might contain affiliate links, which means that if you click on one of the product links, I'll receive a small commission at no additional cost to you.
DISCLAIMER: Always consult your doctor/professional before using any products that are reviewed or mentioned on this channel.
DISCLAIMER: The creator of this channel will not be held responsible for any damages that could arise from acting upon the information that this video contains. The video is for information purposes only.
***My website: https://movelectrics.com
***Business email: contact@movelectrics.com
Kwik Fit understands that when a motorist has a problem with a tyre they want a quality service, value for money, expert advice and the convenience of a local solution.
Tyres are the only point of contact your vehicle has with the road so it is vitally important that you select the right tyre for your vehicle. We advise that you should get in to a habit of checking all four tyres and your spare every two weeks for pressures and general condition.
For more information on how to check your tyres watch our top tip video here - http://www.youtube.com/watch?v=BX1qY97mAw4
Remember that our full trained technicians are on hand 7 days a week to carry out a thorough tyre check for you free of charge.
For more information or to locate your local Kwik Fit centre visit www.Kwik-Fit.com.
Learn how to Fix a Flat Tire yourself so you can get back on the road! I show the entire process of fixing a flat tire from how to inflate the flat tire, how to find the leak in the tire, to how to plug the tire so you can fill it up with air and drive on it safely.
Tools used:
12v Air Pump (cheap): http://amzn.to/2eVv2VA
12v Air Pump (better quality): https://amzn.to/37i058Q
Tire Plug Kit: http://amzn.to/2dKNBuE
Can of air/sealant: http://amzn.to/2f7Nxvd
Screw removal pliers: http://amzn.to/2dKRG2a
Digital Tire Pressure Gauge: https://amzn.to/2vnJ5kj
Jack: http://amzn.to/2eIbnt2
Soapy Wooder: http://chrisfixed.com/store.php
→ Become a ChrisFix Subscriber: http://www.youtube.com/subscri....ption_center?add_use
→ Instagram: https://www.instagram.com/chrisfixit
→ Facebook: https://www.facebook.com/chrisfix8
→ Website: http://www.ChrisFixed.com
→ My Channel Home Page: https://www.youtube.com/ChrisFix
**If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week**
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.
I am often called a cheapskate, and it's got some accuracy - I do hate wasting money, especially when I can figure out a way to do it cheaper (or free) myself.
So I thought I would show you how you can do tyre changes on an adventure bike for little to no dollars spent. This will free up money to spend on good tyres you can swap out depending on your ride, or petrol money, or save for a new bike!
Enjoy!
Get your FREE Say No To Slow content: https://content.saynotoslow.nz..../yt/712-saynotoslow_
#saynotoslow #adventurebike #tyrechange #ktm #adv
Tubeless tyres are now a really viable option for all round road racing, especially if you like to head onto the gravel roads or trails. Simon runs you through the dos and don'ts of setting up tubeless tyres here.
Subscribe to GCN: http://gcn.eu/SubscribeToGCN
Register your interest in the GCN Club: http://gcn.eu/rS
Get exclusive GCN gear in the GCN shop! http://gcn.eu/rR
Road tubeless tires and wheels are becoming increasingly popular, but a number of people have had and continue to have problems with them. Coming up are our tubeless dos and don'ts.
Now firstly, let's have a little recap as to what it actually is. A tubeless system is one that, surprise, surprise, has no inner tube in it. So in order for it to work, the bed of the rim needs to be airtight, so often that can be as simple as putting special tape around to seal it.
Most, though, will have a requirement of some kind of liquid sealant that will then coat the inside of the tire, and fill all these tiny little holes, make it airtight. But then, as an added bonus, that sealant will also seal most punctures as you're riding along.
The most critical part of a road tubeless system is actually the interface between the bead of the tire and the wall of the rim. Both components need to be tubeless specific, in order to be safe. Which leads me neatly on to our first don't. Don't try to make a normal road tire tubeless. It is actually really dangerous, because a tubeless specific tire will have a much stiffer bead on it that won't stretch.
Do consider running a little bit less pressure in your tubeless tires anyway, in comparison to what you might run in your standard tubed tires.
I always run sealant inside my tubeless tires. That way, I get that puncture protection from sharp objects, as well as pinch flats. But, you have to remember, the sealant has a life-span. It will dry out inside the tire. So, from time to time, maybe every three or four months, you need to re-top up those sealant levels.
Don't spend hours and hours trying to pump a stubbornly deflated tubeless tire. With your sealant inside the tire, you want to roll it quite firmly along the ground or your work top. And what that'll do, is it'll coat the bead of the tire with a nice layer of sealant. And that should mean that it inflates much more easily.
If you run tubeless across a number of different bikes, then something like this to Topeak Booster could well be a worthwhile investment. So, it works like a normal track pump. But then it also has this air canister that you charge up to 160 PSI. And then, at the flick of a switch, it releases all that air, super high-volume, exactly like a compressor would work.
Do you have any top tips or hacks for running tubeless that you think we've missed? Let us know in the comments below 👇
If you'd like to contribute captions and video info in your language, here's the link 👍http://gcn.eu/rT
Watch more on GCN...
Clinchers vs Tubeless vs Tubulars http://gcn.eu/TyreTypesVs 📹
Wide tyres and wide rims http://gcn.eu/widetyresrims 📹
Photos: © Bettiniphoto / http://www.bettiniphoto.net/ & ©Tim De Waele / http://www.tdwsport.com
Music: Cristaux - Andre Aguado
About GCN:
The Global Cycling Network puts you in the centre of the action: from the iconic climbs of Alpe D’Huez and Mont Ventoux to the cobbles of Flanders, everywhere there is road or pavé, world-class racing and pro riders, we will be there bringing you action, analysis and unparalleled access every week, every month, and every year. We show you how to be a better cyclist with our bike maintenance videos, tips for improving your cycling, cycling top tens, and not forgetting the weekly GCN Show. Join us on YouTube’s biggest and best cycling channel to get closer to the action and improve your riding!
Welcome to the Global Cycling Network | Inside cycling
Thanks to our sponsors:
Alta Badia: http://gcn.eu/AltaBadia- // Maratona Dles Dolomites: http://gcn.eu/MaratonaDlesDolomites-
Assos of Switzerland: http://gcn.eu/Assos
KASK helmets: http://gcn.eu/KASK
fi’zi:k shoes and saddles: http://gcn.eu/fizikshoes and http://gcn.eu/fiziksaddles
Topeak tools: http://gcn.eu/Topeak
Canyon bikes: http://gcn.eu/-Canyon
Quarq: http://gcn.eu/Quarq
DT Swiss: http://gcn.eu/DtSwiss
Science in Sport: http://gcn.eu/SiS
Orbea bikes: http://gcn.eu/Orbea
Trek Bicycles: http://gcn.eu/-Trek
Vision wheels: http://gcn.eu/Vision
Zipp wheels: http://gcn.eu/Zipp
power2max: http://gcn.eu/power2max
Wahoo Fitness: http://gcn.eu/Wahoo-Fitness
Park Tool: http://gcn.eu/-parktool
Continental tyres: http://gcn.eu/continental-
Camelbak: http://gcn.eu/camelbak-
The GCN Club - http://gcn.eu/club
YouTube Channel - http://gcn.eu/gcnYT
Facebook - http://gcn.eu/gcnFb
Instagram - http://gcn.eu/GCNInsta
Google+ - http://gcn.eu/gcnGPlus
Twitter - http://gcn.eu/gcnTW
Leave us a comment below!
*****PLEASE NOTE***** Just to Clarify that the Green tyre Lever shown in the video is available to purchase separately. It does NOT come with the tyre.
Here we show you how to fit a solid Self Propelled Wheelchair Tyre. To see our video on how to fit a Solid Castor Tyre Click here: https://www.youtube.com/watch?v=8AaXDhS_pH0
24 x 1.3/8" Solid Wheelchair Tyre: http://www.forestmobility.com/....solid-24-x-1-3-8-gre
22 x 1/3.8" Solid Tyre: http://www.forestmobility.com/....solid-22-x-1-3-8-gre
24x1" Solid Tyre: http://www.forestmobility.com/....solid-24-x-1-grey-wh
Tyre Lever: http://www.forestmobility.com/....green-extra-large-ty
Blog Post: http://www.forestmobility.com/....blog/how-to-fit-a-so
In this video Dougal from Longstone Tyres shows you the best way to fit a beaded edge tyre at home.
https://www.longstonetyres.co.....uk/vintage-tyres/bea
Beaded edge tyres are called clincher tires in america and were used on most cars until around 1924. They require high amount of pressure and are not particularly suited to use on tarmac. However they are very authentic for an early vintage car and make the steering light and easy.
Watch this vid and you'll be busting beads like a pro!
--
Tired of paying someone else to mount and balance your tires? With a few basic tools and a little technique you can get your tubeless tires swapped out in about an hour. In this video from the MC Garage we’ll guide you on how to change a motorcycle tire, including the balancing process, and reveal tips and tricks that’ll make the job easier.
Full story here: https://www.motorcyclistonline.....com/tech-tips-how-t
Valve Core Remover - https://amzn.to/2VBgg0a
Tire Irons - https://amzn.to/2VBgS5Y
Motion Pro Rim Protectors - https://amzn.to/2Wb4kma
Windex - https://amzn.to/2VCGCic
Cheap Air Compressor - https://amzn.to/2LC6Bl9
Balance Stand - https://amzn.to/2JDJVOQ
Wheel Weights - https://amzn.to/2VwM3PE
Subscribe: http://www.youtube.com/c/Motor....cyclistMag?sub_confi
Motorcyclist Shirts: https://teespring.com/stores/motorcyclist
Shop Products We Use: https://www.amazon.com/shop/motorcyclistmagazine
See more from us: http://www.motorcyclistonline.com/
Tyre changes can be done at the shop but you could save some money and do them from home with a couple of simple tools. Craig shows us how to change a rear tyre from his home with the basics!
Want to know how to maintain your trials bike but don't know how? Then comment below what "How To" video we should make next!
Website - https://bvm-moto.co.uk/
YouTube Channel - https://www.youtube.com/channel/UC7Bn...
Facebook - https://www.facebook.com/bvmmoto/
Instagram - https://www.instagram.com/bvmmoto/?hl=en
Twitter - https://twitter.com/bvm_trialsport?la...
Spotify - https://open.spotify.com/show/63k0Zfp...
Support us by wearing our gear! - https://bvm-moto.co.uk/index.php?rout...
So in today's Misson I get sent out to swap one tyre from one tractor for another tyre on another tractor. Sounds pointless i know but there's method behind the madness. Also listen to me painfully explain how to do the job at hand for
those who fancy a bit of DIY tyre work.
Holy Enegry
https://weareholy.uk/onemantwolevers
Use code LEVER5 for £5 off first orders
use code LEVER for all 10% off all orders after
Tubular tyres are the pro's choice for racing. Find out how to fit them with GCN.
Subscribe to GCN on YouTube: http://gcn.eu/gcnsubs
Tubular tyres have many advantages, but the process of actually fitting them can be quite difficult.
In the How To we skip the gluing process and go for the cleaner option of tub tape.
To fit a tubular using tub tape, you will need:
Degreaser and clean cloth to clean the rim bed
Tup tape
Scissors
Pump
Tyre lever
Comment and let us know your tips and tricks for gluing tubs!
Music: Hiatus - We Can Be Ghosts Now feat. Shura: http://gcn.eu/GXLsvo
About GCN:
The Global Cycling Network puts you in the centre of the action: from the iconic summit of the Stelvio to the epic trails of Fort William, Scotland, everywhere there is pavé or dirt, world-class racing, and pro riders, we will be there bringing you all the action, essential analysis and unparalleled access every week, every month, and every year.
Welcome to the Global Cycling Network | Inside cycling
Youtube Channel - http://gcn.eu/gcnYT
Facebook - http://gcn.eu/gcnFb
Google+ - http://gcn.eu/gcnGPlus
Twitter - http://gcn.eu/gcnTW
Leave us a comment below!
Music - licensed by Cue Songs
#carcommunity #tmm #diytaj #carhacks #howtodoit #easyfix #tire #carcommunity #CommissionsEarned #ad
Showing Mo how to remove and fit tyre to a steel rim and this is for beginners. Best way to learn is doing on a steel rim even if it damages it doesn’t cost a lot to repair and also use tyre is ideal to learn on just in case while fitting the bead damages.
Thanks for taking your time to watch this tutorial.
www.amazon.co.uk/shop/tajmotormedics
AMAZON ASSOCIATES DISCLOSURE
Taj Motor Medics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
⚠ DISCLAIMER: While Taj Motor Medics strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. Taj Motor Medics is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
For more information please Visit our Website.
https://www.imdb.me/tajkhan
https://www.instagram.com/t4jkhan
https://www.twitter.com/t4jkhan
https://www.facebook.com/t4jkhan
https://www.tajkhan.uk
https://www.tajtyres.com
https://www.tajmotstation.com
https://www.instagram.com/tajtyres
https://twitter.com/tajtyres
https://www.linkedin.com/in/taj-tyres-31b451116
https://www.facebook.com/taj.tyres
https://www.facebook.com/tajmot
Please subscribe for more videos
Here is how TIRE INSTALLERS ARE DAMAGING YOUR RIMS - TIRE REMOVE & INSTALL TIPS AND TRICKS
https://youtu.be/XjXmWzOdxzE
There are a ton of articles on the internet like this one ""The tire shop damaged my wheels!!" or "My Vehicle Wheels/Rims Damaged By Wheel & Tire Shop" or "Tire shop RUINED my rims" and The List Goes On.
I made this video just to show you where they make mistakes and how they can avoid those mistakes.
Tools used
Tire Remove Edge Protection:
https://amzn.to/2MvSyvU
http://s.click.aliexpress.com/e/31kUnp9O
Tire install spray:
https://amzn.to/2pxGqBH
https://amzn.to/31BTwLL
Tire Downholder:
https://amzn.to/2N1w0SQ
Tire change kit :
https://amzn.to/35Rgrpt
Music: Tobu - Good Times
Check out my other YouTube channel https://www.youtube.com/c/CarHax
Here are some cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal toolset (I have bought this one for almost 3 years and I still use it)
http://s.click.aliexpress.com/e/basZfJg8
-22 pieces of a removal toolset
https://s.click.aliexpress.com/e/_d8Ywvv0
-7 pieces of cheap removal toolset
http://s.click.aliexpress.com/e/c5FEA6Uo
Torx:
-Torx Screwdriver Set from T5 to T30
http://s.click.aliexpress.com/e/cdIOzPBK
-Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
http://s.click.aliexpress.com/e/cDOzHHLw
Small Electric Drill Cordless Screwdriver:
http://s.click.aliexpress.com/e/iAkSGXm
Hooks:
http://s.click.aliexpress.com/e/bGDvRimM
Flexible Magnetic Pick-Up Tool:
http://s.click.aliexpress.com/e/btR4NInm
Rubber Eraser disk:
https://s.click.aliexpress.com/e/_Bf9SSEya (I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
http://s.click.aliexpress.com/e/CbIfLBK
Infrared Thermometer:
https://s.click.aliexpress.com/e/_d61sz5u
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
Check out my other YouTube channel https://www.youtube.com/c/CarHax
❗Check any car's mileage and accident history with carVertical 👉 https://bit.ly/3b6S8pI
Here are some cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal tool set (I have bought this one for almost 3 years and I still use it)
http://s.click.aliexpress.com/e/basZfJg8
-22 pieces of a removal tool set
https://s.click.aliexpress.com/e/_d8Ywvv0
-7 pieces of cheap removal tool set
http://s.click.aliexpress.com/e/c5FEA6Uo
Torx:
-Torx Screwdriver Set from T5 to T30
http://s.click.aliexpress.com/e/cdIOzPBK
-Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
http://s.click.aliexpress.com/e/cDOzHHLw
Small Electric Drill Cordless Screwdriver:
http://s.click.aliexpress.com/e/iAkSGXm
Hooks:
http://s.click.aliexpress.com/e/bGDvRimM
Flexible Magnetic Pick-Up Tool:
http://s.click.aliexpress.com/e/btR4NInm
Rubber Eraser disk:
https://s.click.aliexpress.com/e/_Bf9SSEya (I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
http://s.click.aliexpress.com/e/CbIfLBK
Infrared Thermometer:
https://s.click.aliexpress.com/e/_d61sz5u
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
Buy Marathon Plus from Amazon - http://smarturl.it/1xu49u
✩ SUBSCRIBE https://goo.gl/QP4q5V
✩ FACEBOOK https://www.facebook.com/cyclinghabit
✩ INSTAGRAM https://www.instagram.com/cycling_habit/
✩ STRAVA https://www.strava.com/athletes/2484667
___________________________________________________
Business enquiries (only): domas@cyclinghabit.com
5MV-20 - Fitting a Tight Tyre - without tyre levers
--------------------------------------
In this video, I show you a 'trick' that will help you fit a tight tyre (tire) on to a wheel rim when the fit is very tight. The trick will allow you to avoid using tyre levers and hence avoid the potential for puncturing your inner tube by trapping it between the tyre and rim or tyre and lever.
====================
About the 5MV channel
--------------------------------------
My name is Terry and I love cycling. I have named my channel “Five Minute Velo” (5MV). I have called it 5MV because the videos I upload will last no longer than five minutes, many will be much shorter. Each video will cover just one subject that is described in the title. Although the channel is mainly about cycling on the road, I will also cover some light (gravel) off road riding and cycle touring from time to time. No matter what, much of the advice will be pertinent to many branches of the sport/pastime.
I am new to posting videos on YouTube (May 2020) and I have much to learn, particularly in terms of presentation style and production quality. As such I welcome constructive comments that will help me improve the videos that I produce and upload.
There may be some dry humor in some of the videos, so dry it may not always be obvious :-).
====================
My strava profile can be found here:
https://www.strava.com/athletes/7723982
Cambridge Cycling Club website:
http://www.cambridge-cycling-club.org.uk/
Photos of 2019 Tour of low countries:
https://photos.app.goo.gl/3ierczDfurM1gTGi7
Random cycling photos (will be updated from time to time):
https://photos.app.goo.gl/VZBhCWcQZtynsJF1A
====================
Terry
