My Improved Tony Pantalleresco Style AntiNano Bucket

The AntiNano bucket was brought to public awareness by Tony Pantalleresco. Pantalleresco has many youtube videos explainig how these devices work and what they do. A good number of people are using my AntNano buckets. Some are having amazing results!

Want To Build Your Own AntiNano Bucket? Here are few design tips:

The most important concept to remember when building AntiNano coils, is that the copper wire coil wrapped around the bucket needs to be designed to match the voltage and amperage rating of the DC power supply that's being used!!!! This applies to the AntiNano Triangle too.

NOTE: There are three things that will determine the strength of the magnetic pulse: 1.) The thickness of the wire 2.) The number of windings in the coil and 3.) The amount voltage and current and voltage flowing through it. The more windings you have in your coil the greater the electromagnetic magnetic field. The more voltage and current flowing through the coil, the greater the electromagnetic field.

• If the indicator light of your power supply is flashing, the coil on the bucket is drawing too much current from the power supply. The power supply is continuously shutting itself off and restarting due to over current. The power supply is creating a pulse, but forcing it to function in this manor will eventually cause it to fail.

• What's needed is a wire coil that has enough resistance to allow the power supply to function as intended. This means that the proper wire thickness and length is needed to build a properly designed induction coil. In other words, the indicator light on the power supply will remain steady and NOT flash! My AntiNano buckets are wound with nearly two full layers (500 Feet) of 14 gauge wire to get the 2 Ohms resistance necessary for my 12V 12.5 Amp DC power supply to function properly. 1.5 Ohm would be the minimum. There's nearly $100 worth of copper wire in every one of my AntiNano buckets.

• Once the right wire thickness and wire length has been determined that will allow the power supply to function normally, an additional device is needed that will function as an automatic switch and send pulsed current through the coil. That is where the flasher relay comes into play. The flasher relay is an automatic switch, that when inserted into the circuit between the power supply and the bucket, creates the pulsing effect. Here again, the right flasher relay needs to be chosen to match the specifications of the power supply. This can be confusing because there are literally hundreds to choose from. I use a 3 contact 240W flasher relay that I purchased off of eBay. It works great! Here's the link: https://www.ebay.com/itm/313870796757

The 5 gallon round buckets that are most commonly used to build antinano buckets, are quite uncomfortable for people with larger feet. My latest Anti-Nano bucket design uses a 6.5 gallon rectangular shaped bucket that comfortably fits feet up to mens size 13 (European #46).

How do nano-particles get into our bodies? Mostly through the air we breath, but also through vaccines, food and water. Moregellons disease is probably the most serious expression of the nano particle/fiber phenomenon. You will be amazed as to what gets pulled out of your skin with the AntiNano Bucket!!

How does the anti-nano bucket work? The bucket is filled up with one of three solutions (see below). The output from the power supply is plugged into the input of the pulse controller. The output of the pulse controller plugs into the bucket coil. Duration of foot soaks can be from 20 - 60minutes. I recommend having a red or green laser pointer handy so one can see all of the stuff that gets pulled out of the skin. With the anti-nano bucket there is no direct connection with electricity and is therefore completely safe.