Build your own Ultrasonic range finder with Arduino, step by step process with components, circuit, code and output. Please visit below link for more details.
http://www.electronicshub.org/....portable-ultrasonic-

Use the link below to receive a FREE BEAKER & BEAKER HOLDER ATTACHMENT when you buy the P4810 or P4831 from our website:

http://www.isonicinc.com/promo

iSonic Inc makes professional level ultrasonic cleaners, which provide enough power and ultrasonic energy to thoroughly encapsulate vitamin C in liposomes. Watch this video to decide which iSonic ultrasonic cleaner is best for you, and visit our website at http://www.isonicinc.com to purchase your preferred model today!

We recommend the P4810 for home use and our P4831 model for high production of liposomal vitamin C. We always recommend using either our 500ml or 1000ml beakers when making liposomal vitamin C in an ultrasonic cleaner, as well as one of our beaker holder attachments.

Follow us on Instagram and Facebook!

http://instagram.com/isonicinc
https://www.facebook.com/isonicinc

Do you have questions? Email us at info@isonicinc.com

Hi ,
This video is to show you how to make a simple ultrasonic sensor controller using NE555 IC.


◾ Circuit diagram - https://drive.google.com/file/....d/1GC3b-4tVIfk8-n98Y


◾ Buy Ultrasonic sensor - https://amzn.to/3KNSfYX
◾ Buy NE555P - https://amzn.to/3tWiVj9

Here we made a smart blind stick with voice alert using Arduino Uno and Ultrasonic sensors. Check out Full Project Tutorial including circuit diagram and code: https://circuitdigest.com/micr....ocontroller-projects

The primary goal of this project is to assist blind people to walk with ease and to alert them whenever their walking path is obstructed by other objects or people.

As a warning signal, a Voice module is connected in the circuit, that gives a voice warning according to the direction of the object, for example, if the object is in Left then it will say ‘Careful Object in Left’.

This Smart stick will have three Ultrasonic sensors connected in left, right, and center to sense distance from any obstacle, a JQ6500 Voice Sound Module to give warning signal, and a 9V battery to power the setup.
-------------------------------------------------------------------------------------------------------------------------
If you have any doubt or questions regarding this project, you can visit https://circuitdigest.com/forums to get them answered or to start a discussion.

Subscribe to our Newsletter to never miss an update on CircuitDigest:
http://eepurl.com/dJ5xqU

For more Arduino based tutorials, please visit https://circuitdigest.com/arduino-projects

Find the latest electronics industry news covering new electronics components releases in various electronics domains such as embedded, power electronics, analog, digital, IoT, and Automotive industries: https://circuitdigest.com/news
-------------------------------------------------------------------------------------------------------------------------
Connect with CircuitDigest:
👉 Website: https://circuitdigest.com/
👉 Facebook: https://www.facebook.com/circuitdigest
👉 Twitter: https://twitter.com/CircuitDigest
👉 Instagram: https://www.instagram.com/circuit_digest
👉 Pinterest: https://in.pinterest.com/circuitdigest
👉 LinkedIn: https://www.linkedin.com/company/circuit-digest/

Like, Share, and Subscribe to our YouTube Channel: https://www.youtube.com/Circuitdigest
-------------------------------------------------------------------------------------------------------------------------
#Arduino #smartblindstick #diyelectronics

Hello friends, in this video i have made a Radar using an arduino and an HC SR-04 Ultrasonic Sensor module.

i have placed the sensor on a servo motor and it rotates at an angle of 165 degrees. the sensor collects data and displays on the monitor. i have used processing 3 software to display the data in an interactive radar display. you can also make this project on your own. you will find all the necessary files, code links, schematic, product links below


Code Links:

Arduino Code: https://bit.ly/2LCYsds

Processing Code: https://bit.ly/2X6wDQ6

Download processing from here:

Schematic: https://bit.ly/3dWGH5g


Product Links:

Arduino Uno Micro USB: http://bit.ly/aRdUiNo

Ultrasonic Sensor: https://bit.ly/3cEBUVP

Servo Motor: https://bit.ly/2XaBakO


Solder Iron i Use: http://bit.ly/2GSArih

Helping Hand Magnifier: http://bit.ly/2Uh11oe

arduino uno Micro USB: http://bit.ly/aRdUiNo


also do check out these cool 3d Printers:

Creality Ender 3 pro : http://bit.ly/36m1POI
Creality CR-10s pro: http://bit.ly/2QmqU6z


#Arduino #ArduinoRadar #SuperbTech #UltrasonicSensor

Ultrasonic cleaner do they work

business and permissions inquires bodgitandleggit@gmail.com
https://www.paypal.me/bodgitandleggit
http://ko-fi.com/bodgitandleggitgarage
https://www.patreon.com/Bodgitandleggitgarage
https://www.gofundme.com/antilagforcosworth

bodgit and leggit garage
tips and tricks inside this video hopefully help you
don't forget get your hands dirty

http://www.bodgitandleggitgarage.com/
http://bodgitandleggitforum.editboard.com/
http://bodgitandleggitgarage.spreadshirt.ie/
https://www.facebook.com/bodgitandleggitgarage
https://www.instagram.com/bodgitandleggitgarage/

I get ask lots of times what do I use my ultrasonic cleaner for really easy thing to say is just for cleaning things but they do work and they work fantastic all depends what you are cleaning to what cleaning fluid you need but as you can see from this video it will rip off the carbon build-up from the EGR valve and EGR cooler these will do a multiple of things I've cleaned injectors turbos basically anything you can fit into it it will clean

Ultrasonic cleaning is a process that uses ultrasound (usually from 20–400 kHz) and an appropriate cleaning solvent (sometimes ordinary tap water) to clean items. The ultrasound can be used with just water, but use of a solvent appropriate for the item to be cleaned and the type of soiling present enhances the effect. Cleaning normally lasts between three and six minutes, but can also exceed 20 minutes, depending on the object to be cleaned.[1]

Ultrasonic cleaners are used to clean many different types of objects, including jewelry, lenses and other optical parts, watches, dental and surgical instruments, tools, coins, fountain pens, golf clubs, fishing reels, window blinds, firearms, car fuel injectors, musical instruments, gramophone records, industrial parts and electronic equipment. They are used in many jewelry workshops, watchmakers' establishments, and electronic repair workshops

Ultrasonic cleaning uses cavitation bubbles induced by high frequency pressure (sound) waves to agitate a liquid. The agitation produces high forces on contaminants adhering to substrates like metals, plastics, glass, rubber, and ceramics. This action also penetrates blind holes, cracks, and recesses. The intention is to thoroughly remove all traces of contamination tightly adhering or embedded onto solid surfaces. Water or solvents can be used, depending on the type of contamination and the workpiece. Contaminants can include dust, dirt, oil, pigments, rust, grease, algae, fungus, bacteria, lime scale, polishing compounds, flux agents, fingerprints, soot wax and mold release agents, biological soil like blood, and so on. Ultrasonic cleaning can be used for a wide range of workpiece shapes, sizes and materials, and may not require the part to be disassembled prior to cleaning.[5]

Objects must not be allowed to rest on the bottom of the device during the cleaning process, because that will prevent cavitation from taking place on the part of the object not in contact with solvent

Learn how to build the ScioBot 2.0 Vision with an Ultrasonic Sensor! The ScioBot 2.0 Vision Ultrasonic shows you how to integrate an Ultrasonic Sensor with your microcontroller to interact with the real world. You will be able to program your robot to navigate autonomously and make decisions based on the environment around it!

Purchase kit: https://www.etsy.com/shop/NonscioRobotics

If you haven't built your ScioBot 2.0 yet, watch this video: https://youtu.be/m9P8rz-42HA




Music https://bensound.com

Hello, guys in my first video on youtube I show you how to make your ultrasonic levitator, it's so easy, and hope it be usefull .

My IG : https://www.instagram.com/cifertech/

Everything you need for this project :
1. Arduino Nano
2. Motor driver L298N
3. ultrasonic (transmiter)
and other

==========you can download the code down bellow==========
link: https://cifertech.net/how-to-m....ake-ultrasonic-levit

#electronics #diy #maker

Hello! I'm Lees, an essentialist fashion blogger who loves product reviews! This week, we discuss ultrasonic cavitation and how these treatments can help you lose fat! This Sonic Lift fat cavitation and cellulite remover is the perfect at-home treatment to replace your medspa visits! Now, remember, the only way on how to get abs is by eating healthy, exercising, and drinking lots of water! This machine definitely helps with those tough spots that are hard to eliminate when you're asking yourself how to get a six-pack! I hope you enjoyed my sonic lift review and take advantage of this kit so you can stop asking yourself how to get abs at home.

This machine has been improved, get it here:
https://shopstyle.it/l/bLgpH
A reasonably priced amazon gel: https://shopstyle.it/l/bLgpW
The gel I used: https://rstyle.me/+wVnZzHdZW5tV3l8Tib_ZgQ

*This video review is a paid partnership with Sonic Beauty. These results are 100% authentic after two weeks of using the device and the heating cream on occasions. These results are also mixed with consistent exercise and healthy eating! No machine will give you abs without putting in the work, don't forget that!

ADDED* I know there is some skepticism so I have taken the liberty of uploading my timestamps for my video editor of when the before and after were created. You don't have to believe that, but if you look at the video you can even see how I re-decorated my room the next month and moved things around and I'm not even wearing the same top. I understand the comments which is the reason why I'm providing this as proof of results. Thanks for watching!*
VIDEO TIMESTAMPS: https://bit.ly/2yWER4R

Dupe or Designer is a creative outlet that specializes in Amazon reviews for Her. Unbox luxury bags and their dupe counterparts. See genuine before & after cosmetic injections and enjoy Zara Fashion Hauls.

https://linktr.ee/dupeordesigner

Want to Collaborate or buy the rights to this video?
leesdaryanne@gmail.com
*Please note, all videos on my channel are copyrighted, and downloading and using without rights will be penalized with legal action.

*My Camera: https://amzn.to/2WoIIQb
*My lens: https://amzn.to/3deqCaK
*Memory Card: https://amzn.to/2WpnCRZ
*My lighting: https://amzn.to/2R5B2kq

Get $20 for FREE (No catch!) https://www.rakuten.com/r/LEESDA9

*Some links above are affiliate links. If you purchase, I will make a tiny commission. Your price will not increase. Thank you for supporting what I do on this channel.
#howtogetabs #sonicbeauty #ultrasoniccavitation

Use Coupon Code "Android" at http://www.domain.com/ checkout

Jayce talks about this week's Android news!

Talk about Android in our forums: http://www.androidauthority.com/community

Subscribe to our YouTube channel: http://www.youtube.com/subscri....ption_center?add_use
----------------------------------------------------
Stay connected to Android Authority:
- http://www.androidauthority.com
- http://google.com/+androidauthority
- http://facebook.com/androidauthority/
- http://twitter.com/androidauth/
- http://instagram.com/androidauthority/

Follow the Team:
Josh Vergara: https://plus.google.com/+JoshuaVergara
Joe Hindy: https://plus.google.com/+JosephHindy
Lanh Nguyen: https://plus.google.com/+LanhNguyenFilms
Jayce Broda: https://plus.google.com/+JayceBroda
Gary Sims: https://plus.google.com/+GarySims
Ash Tailor: https://plus.google.com/+AshTailor

Make your own ultrasonic humidifier for a fraction of the cost you pay for the commercial product! I made this one from PVC, a small fan, a pond mist unit & some other spare parts. Effective & efficient DIY way to make a humidifier from repurposed parts. I started with a basic design and then dialed it in. After testing and collecting data* on my usage over a 3 month period I analyzed the results and was amazed at how well this little powerhouse of a humidifier worked!

If you enjoyed this video, then you may also like my DIY Personal Air Cooler: https://youtu.be/pGNHrJw27PY

* Data analyzed includes water consumption, changes in ambient humidity level & temperature, cross comparison to outside humidity & temperature changes and more.