Latest videos

Home
Articles

10 Best Ultrasonic Cleaner 2023 - Do cheap ultrasonic cleaners work? Review & Buying Guide 121gamers 2 Views • 3 years ago

10 Best Ultrasonic Cleaner 2023 - Do cheap ultrasonic cleaners work? Review & Buying Guide
Product Link:
https://amzn.to/3Y4NaCw
https://amzn.to/3YgfvWk
https://amzn.to/3HYankj
https://amzn.to/3XVlH69
https://amzn.to/40wiE6f
https://amzn.to/3I6ivPP
https://amzn.to/40llPNQ
https://amzn.to/3l79PPV
https://amzn.to/3HxnEi3
https://amzn.to/3JCufdJ

Ultrasonic cleaners are machines that use ultrasonic waves to clean surfaces. They are very efficient at removing dirt, dust, and other contaminants from surfaces. They are also very effective at removing oils and grease.

One of the benefits of using an ultrasonic cleaner is that it is very fast. Most ultrasonic cleaners can clean a surface in just a few seconds. This makes them great for cleaning small areas.

Another benefit of using an ultrasonic cleaner is that it is very safe. Most ultrasonic cleaners use very small amounts of energy. This means that they are safe to use on most surfaces.

Most ultrasonic cleaners also have a built-in vacuum. This means that they can suck up any debris that is on the surface that they are cleaning. This makes them great for cleaning areas that are difficult to reach.

Overall, ultrasonic cleaners are great machines for cleaning surfaces. They are fast, safe, and efficient.

Looking for the best ultrasonic cleaner for your home? There are a few things to consider when making your purchase.

First, it is important to decide what type of ultrasonic cleaner you need. There are three types of ultrasonic cleaners: handheld, floor, and rug. Handheld cleaners are the smallest and are perfect for smaller areas such as crumbs on a counter or dust on a bookshelf. Floor cleaners are larger and are best for larger areas such as a kitchen or living room. Rug cleaners are the largest and are best for areas with lots of dirt or dust.

Next, consider the features you need in your cleaner. Some important features to look for are the type of cleaner head (handheld, floor, or rug), the vibration speed, the water tank size, and the noise level.

Finally, decide which type of cleaner is best for your needs. If you only need a handheld cleaner, choose a model with a small, portable head. If you need a floor cleaner, choose one with a large water tank and a powerful vibration speed. If you need a rug cleaner, choose one with a detachable head and a large water tank.

Fair Use Disclaimer:
This channel may use some copyrighted materials without specific authorization of the owner but contents used here falls under the “Fair Use”
Copyright Disclaimer under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.

𓍝 Disclaimer (COPYRIGHT ISSUE):
Some of the footage within this video was developed for education purposes. Parts of stock footage of items were collected from manufacturers, fellow creators, and various other sources. If you can find any copyright infringement then please notify us via email and we will accommodate you for sure.
❣ All rights reserved by respective owners. ❣

Affiliate Disclaimer: This description may contain affiliate links. If you purchase a product through one of them, I will receive a commission (at no additional cost to you).

A Step By Step Complete Build Of Arduino Robot Car With Ultrasonic Sensor For Hands Free Operation 121gamers 9 Views • 3 years ago

Check out our step by step complete build of an Arduino robot car that has an ultrasonic sensor device for hands free movement and operation.

🔔🔔 SUBSCRIBE 🔔🔔 don't forget to subscribe and click the bell!
https://www.youtube.com/channe....l/UCt4bQMxOytascRdZm

Be sure to check out the chassis assembly and review here!
https://youtu.be/Q4UmbjXwoZ4

do an Amazon search using the ASIN provided below each part
(may be cheaper on Ebay)
1. ELEGOO UNO R3 Board ATmega328P
Amazon - ASIN ‏ : ‎ B01EWOE0UU

2. SG90 micro Servo Motor
Amazon - ASIN: B072V529YD

3. HC-SR04 Ultrasonic Module Distance Sensor
Amazon - ASIN: ‎ B01COSN7O6

4. Mini Breadboard 170 Tie-Points
Amazon - ASIN: B07VFFXPH3

5. 9 V Battery Clip Connector
Amazon - ASIN: B07TRKYZCH

*6. 2.54mm Straight Single Row Male Pin Header Connector
Amazon - ASIN ‏ : ‎ B07BXDYTBP

7. DIY Robot Smart Car Chassis Kit
Amazon - ASIN: B07DNYQ3PX

8. L293D DC Motor Drive Shield Stepper Motor Drive Shield
Amazon - ASIN: B01DG61YRM

9. Breadboard Jumper Wires
Amazon - ASIN: B07GD2BWPY

Facebook: https://www.facebook.com/BMons....ter-Laboratory-10141
Find the code on our Facebook page. Search #robouino
Twitter: https://twitter.com/b_monsterlab

check out our Arduino play list!
https://www.youtube.com/playli....st?list=PLcO7FXCqKbe

Chapters:
0:00 intro
0:39 parts list
1:47 the L293D motor driver
4:25 more about the L293D board
5:16 soldering header pins
6:08 building the robot car
7:25 component connections
8:46 Arduino IDE code

This is our first Arduino robot car video. In this video we include a start to finish step-by-step tutorial on how to build an obstacle avoidance car with an ultrasonic sensor device. If you are looking for ultrasonic sensor projects or a hands free robot car, here is your complete build! This video includes some L293D board info, soldering, building the robot car, and some tips for Arduino IDE for those of you who are new. We are happy to include hi def images of the components and easy to see animated connections. If you like it better this way, let us know in the comments. We have included the item list above with the Amazon ASIN number - just search the ASIN number at the Amazon website. Shop around and see if you can find a better deal as well. We are happy to share fun Arduino projects that are also great STEM ideas. We hope to have many more Arduino robot build videos on this channel in the future. Thank you for watching !

How to Make Distance Meter Using Ultrasonic Sensor (Arduino Project) 121gamers 3 Views • 3 years ago

how to make obstacle avoiding robot using Arduino and ultrasonic sensor [low cost] 121gamers 2 Views • 3 years ago

Hello guys, This video includes how to make an Obstacle avoiding robot using Arduino UNO board, ULtrasonic sensor, and L298N motor drive board. Also, we can make this 'obstacle avoiding' robot at a low cost.
OK enjoy it now.
Short and sweet tutorial.Only from SriTu tech. If you think this video is good, don't forget to like and comment.

how to make obstacle avoiding robot using Arduino and ultrasonic sensor [low cost]
https://youtu.be/pYX7bHzucxo

how to make obstacle avoiding robot using Arduino and ultrasonic sensor

*** Low-cost projects.
***Names of material.
***step by step.
***Make it easy.

Subscribe to more videos --- https://www.youtube.com/c/SriTuTech_SriTu_Hobby

Website for more tutorial --- https://www.srituhobby.com

Android app for more tutorial --- https://bit.ly/3GWcmmD

( Source code and circuit diagram )
=========================================
Website -- https://bit.ly/3glcFKY
Android app -- https://bit.ly/3GWcmmD
=========================================

Part's List (Banggood)
==========================================
1.Arduino Uno x 1---- https://bit.ly/3342ODJ
2.Ultrasonic sensor x 1 ---- https://bit.ly/2J1Uxck
3.Servo Motor x 1 ---- https://bit.ly/3kVcWET
4.Jumper Wires ---- https://bit.ly/35VOS0i
5.Motor driver x 1 ----- https://bit.ly/3fnvhcx
6.Gear motor x 2 -- https://bit.ly/2KlGXkt
7.5mm foam board -- https://bit.ly/333UFiC
==========================================

Part's List (Amazon)
==========================================
1.Arduino Uno x 1 ---- https://amzn.to/3hnMhPj
2.Ultrasonic sensor x 1 ---- https://amzn.to/3gLCkRj
3.Servo Motor x 1---- https://amzn.to/3bRunmM
4.Jumper Wires ---- https://amzn.to/2RjTt4e
5.Motor driver x 1----- https://amzn.to/3c6vkYM
6.Gear motor x 2 --- https://amzn.to/2ZrL0AD
7.5mm foam board -- https://amzn.to/2Zz2pr2
==========================================

( Social media links )
==========================================
facebook--------https://www.facebook.com/sritutech
twitter-------------https://www.twitter.com/sritutech
instagram-------https://www.instagram.com/sritutech
pinterest---------https://www.pinterest.com/mysritutech
==========================================

Thanks for watching......................
If you learned something in this video,
**Like.
**Share.
**Subscribe.
What do you think? please comment below.

#SriTu_Tech_arduino #Robot #Obstacle_avoiding

No Ice Ultrasonic Fog Chiller Build! 121gamers 1 Views • 3 years ago

ATTENTION! PLEASE LOOK HERE FOR THE UPDATED DETAILS AND THE IMPROVED FINAL VERSION OF THIS BUILD! - https://youtu.be/od-nG93ywDA

Here are the details on what is inside the no ice fog chiller. This is my version based on what I've seen in the video made by Intocoasters and some videos of the Cumulus fog machine made by Chauvet. No ice is needed at all for this chiller to create low lying fog. It uses water vapor instead to saturate the fog and makes it heavier by making it "wetter". All I have to do is keep an eye on the water level and refill it when it starts to get low, which will take many hours with a tank this size. The mister is the most expensive part of this build at around $100-$150 for a 10 head mister with a power supply. I'll list the parts below for anyone who wants to make one themselves.

EDIT - It has been determined that the secondary tank and water pump will not be needed if a float is purchased or built for the ultrasonic mister. The mister head can float in the main tank without the need for recirculation as long as the tank is of a large enough size to not get overheated or run empty quickly. Here is a link to the float I used for my 10 head unit. - https://amzn.to/3D0h0gn I've also rebuilt mine after failing to get a satisfactory lid seal on the tote. Please see this video for details on how to improve this build - https://youtu.be/od-nG93ywDA I apologize for any headaches and wasted time/money this tutorial may have caused everyone. I'm going to leave it up because it shows the details on making it, but I highly recommend using a float instead of the second tote and pump and use a sturdier box than a tote that can be sealed easier.

1 - 6̶5̶ ̶G̶a̶l̶l̶o̶n̶ ̶"̶C̶o̶m̶m̶a̶n̶d̶e̶r̶"̶ ̶t̶o̶t̶e̶ ̶=̶ ̶L̶o̶w̶e̶s̶ - EDIT 10/9/21 I had a lot of trouble sealing this tote against fog leaking out. Don't use it. - EDIT 10/25/21 A Kobalt tool chest from Lowe's - stock #1407437 is a much better box to use for this build. A thick bead of RTV sealant can be used around the underside of the lid to make a gasket that will seal it up tight. Others have reported good success with a variety of weatherproof tool boxes.

1- 5̶ ̶G̶a̶l̶l̶o̶n̶ ̶"̶C̶o̶m̶m̶a̶n̶d̶e̶r̶"̶ ̶t̶o̶t̶e̶ ̶=̶ ̶L̶o̶w̶e̶s̶ - NOT NEEDED IF USING A FLOAT FOR THE MISTER (RECCOMMENDED)

1- 3" 90 Degree Sweep Elbow = Lowes (inlet pipe)

1- 3" Straight Coupling = Lowes (underside inlet pipe)

3" PVC Pipe (You will only need about 4-8 inches) = Lowes

1- 3" Closet Flange = Lowes (outlet pipe) - You can use 3" pvc, but you will have to use a coupling to secure it and need a reducer to get the hose to fit over it.

PVC Cement epoxy or other glue for the pipe fittings

1- 3" x 6ft Flex Hose = Amazon - https://amzn.to/3ncPNCE

1- Hose Clamp or zip ties suitable for 3" Hose = Lowes

1- 9̶5̶ ̶G̶P̶H̶ ̶S̶u̶b̶m̶e̶r̶s̶i̶b̶l̶e̶ ̶P̶u̶m̶p̶ = Amazon - https://amzn.to/3BSNsRp - NOT NEEDED IF USING A FLOAT FOR THE MISTER HEAD (RECCOMMENDED)

3̶/̶8̶ ̶t̶u̶b̶i̶n̶g̶ ̶f̶o̶r̶ ̶t̶h̶e̶ ̶S̶u̶b̶m̶e̶r̶s̶i̶b̶l̶e̶ ̶P̶u̶m̶p̶ ̶(̶a̶b̶o̶u̶t̶ ̶1̶8̶"̶)̶ ̶-̶ ̶L̶o̶w̶e̶s̶ - NOT NEEDED IF USING A FLOAT FOR THE MISTER HEAD (RECCOMMENDED)

1 B̶r̶i̶c̶k̶ ̶o̶r̶ ̶o̶t̶h̶e̶r̶ ̶w̶e̶i̶g̶h̶t̶ - NOT NEEDED IF USING A FLOAT FOR THE MISTER HEAD (RECCOMMENDED)

1- 10 Head Ultrasonic Mister = Amazon or Ebay $100 to $150

Silicone Caulk or RTV gasket maker for sealing around the pipes and under the lid

F̶o̶a̶m̶ ̶W̶i̶n̶d̶o̶w̶ ̶W̶e̶a̶t̶h̶e̶r̶s̶t̶r̶i̶p̶p̶i̶n̶g̶ ̶(̶Y̶o̶u̶ ̶w̶i̶l̶l̶ ̶n̶e̶e̶d̶ ̶a̶r̶o̶u̶n̶d̶ ̶1̶2̶ ̶f̶e̶e̶t̶)̶ ̶or Silicone RTV gasket maker if you are using the Kobalt tool box for your build.

4̶ ̶b̶o̶l̶t̶s̶ ̶w̶i̶t̶h̶ ̶w̶a̶s̶h̶e̶r̶s̶ ̶a̶n̶d̶ ̶n̶u̶t̶s̶ ̶f̶o̶r̶ ̶a̶t̶t̶a̶c̶h̶i̶n̶g̶ ̶t̶h̶e̶ ̶d̶r̶a̶i̶n̶ ̶f̶l̶a̶n̶g̶e̶ - not needed if using 3" pvc and a coupler.

1- Large SOCKitBOX connection box = Amazon - https://amzn.to/2YGANTm

1- ̶1̶2̶v̶ ̶P̶C̶ ̶f̶a̶n̶ ̶=̶ ̶T̶h̶e̶s̶e̶ ̶c̶a̶n̶ ̶b̶e̶ ̶f̶o̶u̶n̶d̶ ̶e̶x̶t̶r̶e̶m̶e̶l̶y̶ ̶c̶h̶e̶a̶p̶l̶y̶ ̶o̶n̶ ̶A̶m̶a̶z̶o̶n̶ ̶o̶r̶ ̶E̶b̶a̶y̶ ̶o̶r̶ ̶c̶a̶n̶ ̶b̶e̶ ̶t̶a̶k̶e̶n̶ ̶o̶u̶t̶ ̶o̶f̶ ̶o̶l̶d̶ ̶c̶o̶m̶p̶u̶t̶e̶r̶s̶ ̶o̶r̶ ̶b̶r̶o̶k̶e̶n̶ ̶g̶a̶m̶i̶n̶g̶ ̶c̶o̶n̶s̶o̶l̶e̶s̶.̶ ̶Y̶o̶u̶ ̶w̶i̶l̶l̶ ̶h̶a̶v̶e̶ ̶t̶o̶ ̶w̶i̶r̶e̶ ̶i̶t̶ ̶t̶o̶ ̶a̶ ̶1̶2̶v̶ ̶p̶o̶w̶e̶r̶ ̶s̶u̶p̶p̶l̶y̶ ̶y̶o̶u̶r̶s̶e̶l̶f̶.̶ ̶V̶e̶r̶y̶ ̶e̶a̶s̶y̶ ̶t̶o̶ ̶d̶o̶.̶ ̶W̶a̶t̶e̶r̶p̶r̶o̶o̶f̶ ̶v̶e̶r̶s̶i̶o̶n̶s̶ ̶c̶a̶n̶ ̶b̶e̶ ̶p̶u̶r̶c̶h̶a̶s̶e̶d̶ ̶f̶o̶r̶ ̶a̶ ̶h̶i̶g̶h̶e̶r̶ ̶p̶r̶i̶c̶e̶.̶ USE A MARINE BILGE PUMP BLOWER INSTEAD OF WHAT I USED IN THE VIDEO! They are overpowered and you need to use a speed control to slow it down by about 75%, but they are made for wet environments and can be attached to the outlet hose instead of inside the box. Links below for the blower and speed control...
Blower - https://amzn.to/3piVsZ4
Speed Control - https://amzn.to/3n8FFZX

And this is not shown in the video because I decided to add it later, but I put a drain plug between the wheels of my tote to make it easier to empty the water out of the tote. Install it so that the plug is on the inside where it can easily be reached. https://amzn.to/3lxkTm9

Showing 421 out of 422

Please note that if you are under 18, you won't be able to access this site.

Latest videos

Language