Top videos | Cash In Vids Make Money From Vids And Vloging CashInVids CashInVids.com

Home
Articles

Top videos

All Time

Today

This week

This month

This year

How to Make a Concrete Sidewalk - Do It Yourself paccione .co.uk 2 Views • 2 years ago

Bosch demo hammer: https://amzn.to/2zSqJuy still needs the shovel attachment: https://amzn.to/2z6CQnm
A well reviewed option for less than $200: https://amzn.to/3dD7pjC
Quikrete Concrete Expansion Joint: https://amzn.to/2A30IIX
Due to requests, I am now including links to products when possible. These links are provided for reference, no company or individual paid to be in this video. Depending on the vendor, a small commission might be paid and if so, would be used to support continuing this channel.
Amazon Prime free 30-day trial: https://amzn.to/2U9pttN

More Teresa and YNH: https://www.youtube.com/playli....st?list=PLjTMbsoHW2e

Installing a walkway can be a very labor intensive job, but if you do it yourself, you can save a lot of money over hiring contractor.

Before you get started, you’ll need the following materials.
-fiber reinforced concrete
-claw hammer
-line level: https://amzn.to/2AxwsFX or https://amzn.to/3gYpxGL
-wooden stakes
-expansion joints: we used https://amzn.to/2A30IIX
-wood forms
-trowel
-wheelbarrow
-Bosch electric shovel: https://amzn.to/2zSqJuy or manual equivalent
-concrete mixing tools
-broom
-tape measure

First, determine how long and how wide you want your walkway to be. After you’ve measured the width, drive a stake into the ground on both sides of where you’ll begin, these stakes will be your reference points for the remainder of the project.

Then, attach a screw to the lower third of the first stake. Use a line level to make sure you’ve got the proper angle of drainage away from the house.

The line level is basically a long piece of string strung through a small level. The string fits through two holes on top of the level, so you can slide the level along the string.

Take one end of the string, attach it to the screw you’ve installed on the first stake, drive a second stake at the end of your proposed walkway. Attach the other end of the string to this stake and check to make sure that you will have proper drainage. In other words, you don’t want the bubble to show “level”,you want there to be a slight slope away from the house. (Failure to make sure water will drain away from your house could later cause foundation problems)

Next, use a shovel or the Bosch electric shovel, to dig out the area of your walk.

Once this is done, sink a stake about ever two feet on both sides of the cut out ground where your walkway will go. Then take 3” X 4’ pieces of plywood and attach them at ground level to the stakes. You can use a cordless screwdriver to hold the plywood to the stakes. These pieces of wood are your concrete forms which will hold the cement in place when you’re ready to pour the walkway.

But first, put in your expansion joints. Expansion joints are installed about every three feet and are used to keep your concrete from cracking during expansion and contraction in hot and cold weather.

Using fiber reinforced concrete, which we used in this segment, is a good idea. The hundreds of thousands of tiny fibers give the concrete extra strength as is hardens, thereby eliminating the need for wire mesh or re-bar to support ordinary concrete.

Mix your concrete in a wheelbarrow. Then pour the walkway into the forms. Use a trowel to smooth it out and make sure you have a nice even finish.

TIP: Before the concrete dries, use a broom to give the surface texture. Simply take a broom and lightly sweep across the concrete from side to side. This will put small grooves into the concrete surface as it dries and will reduce the chance of your walkway being slippery when wet.

After the concrete has thoroughly dried (usually five days) remove the outer forms and stakes and you’ve got a beautiful walkway.

WHAT WE USED

The material used to install the backyard sidewalk was Quikrete Fiber Reinforced Concrete.

Quikrete’s fiber reinforced concrete contains hundreds of thousands of tiny fibers which finish smooth, eliminating the need for wire mesh or heavy re-bar in many slab-on-grade applications like walkways, patios steps etc. Specially developed to minimize cracking, chipping and flaking.

Fiber reinforced concrete also dramatically reduces cracking caused by drying shrinkage.

Quikrete Expansion Joint Strips, https://amzn.to/2A30IIX protect concrete slabs from potential damage caused by expansion and contraction. Made from cane fiber, the five foot long strips are weather resistant, absorb very little water, and do not become brittle in cold weather.

Amazon Tool Deals: https://amzn.to/3eUkYLB

MORE FROM YOUR NEW HOUSE
Featured videos:
https://www.youtube.com/playli....st?list=PLjTMbsoHW2e

Great DIY Projects from Your New House:
https://www.youtube.com/playli....st?list=PLjTMbsoHW2e

Quick Tips:
https://www.youtube.com/playli....st?list=PLjTMbsoHW2e

Gardening and Landscaping:
https://www.youtube.com/playli....st?list=PLjTMbsoHW2e

Primitive Technology: Wood Ash Cement & Fired Brick Hut paccione .co.uk 2 Views • 2 years ago

Primitive Technology: Wood Ash Cement & Fired Brick Hut
Subscribe: http://bit.ly/subPT | Never miss a video! Enable ‘ALL’ Notifications!
Watch my newest content: https://youtube.com/playlist?list=PLGnWLXjIDnpBR4xqf3FO-xFFwE-ucq4Fj&playnext=1&index=2

Follow Primitive Technology:
Wordpress: https://primitivetechnology.wordpress.com/
Patreon: https://patreon.com/user?u=2945881

Watch More Primitive Technology:
Newest Uploads: https://youtube.com/playlist?list=PLGnWLXjIDnpBR4xqf3FO-xFFwE-ucq4Fj&playnext=1&index=2
Pyrotechnology: https://youtube.com/playlist?list=PLGnWLXjIDnpBVRqu5lz5JGaQxjPs7q3CJ&playnext=1&index=2
Shelter: https://youtube.com/playlist?list=PLGnWLXjIDnpBBsdKZb-vy30o88SIxItp2&playnext=1&index=2
Weapons: https://youtube.com/playlist?list=PLGnWLXjIDnpA-XGDrrmVgBnSXx15i2Awp&playnext=1&index=2
Popular Videos: https://youtube.com/playlist?list=PLGnWLXjIDnpAb29Lrdki5BPjTpMon8zla&playnext=1&index=2

About This Video:
I built a hut from fired clay bricks and mortared them together with a cement made from wood ash left over from the firing process. When I developed wood ash cement years ago in a previous video, it was in response to the need of a cement made from material other than lime stone, which is absent in my location. Wood ash was suitable because it contains calcium oxide, the active cementitious material for making mortar. I made clay bricks and fired them in a kiln made previously. Then I collected the wood ash and made them into pellets storing them for later use. When it was time to make the mortar, I put the pellets in the kiln and fired them. Here it's important to note that the ash needs to be fired at a high temperature with oxygen, ordinary ash from a camp fire won't work as is because they don't get hot enough. It needs to be pelletized and fired again in a kiln before use. I mixed the fired ash pellets with sand (1:3 ratio by volume) and used it to mortar the bricks together. It's important to use a trowel (flat piece of wood here) instead of bare hands to handle the mortar due to lye burning the skin (I got mild lye burns on my fingers). The ash left over from firing the bricks was enough to mortar those same bricks together. The hut was 2x2 m and 2 m high at the gables. Wooden beams were placed onto the gables to form the roof and secured in place with mortar. Then I made barrel roof tiles and lay them onto these beams. The whole project took 6 and a half months to build. The hut sheds rain well and the mortar is water proof (won't dissolve in water), surviving many rainstorms even before the roof was up. The main take away from this video is to always look for a way to take a waste material (wood ash) and make it into a resource (cement).

About Primitive Technology:
Primitive technology is a hobby where you build things in the wild completely from scratch using no modern tools or materials. These are the strict rules: If you want a fire, use a fire stick - An axe, pick up a stone and shape it - A hut, build one from trees, mud, rocks etc. The challenge is seeing how far you can go without utilizing modern technology. I do not live in the wild, but enjoy building shelter, tools, and more, only utilizing natural materials. To find specific videos, visit my playlist tab for building videos focused on pyrotechnology, shelter, weapons, food & agriculture, tools & machines, and weaving & fiber.

#PrimitiveTechnology #WoodAshCement #FiredBrickHut

How to make a paper boomerang - paper origami - boomerang paccione .co.uk 2 Views • 2 years ago

Simple way of making boomerang
Best Origami Course - https://bit.ly/3eW7E9N
Boomerang Craft Toy- https://bit.ly/2ZSYxjV
Subscribe for more videos:
https://www.youtube.com/channe....l/UC5RldQOORCa2xYPvM

For Business queries(PROMOTIONS, SPONSORS OR ANY OTHER BUSINESS RELATED QUERY) contact: artkoworldofficial@gmail.com
----------------------------------------------------------
How to make Mini Paper Boomrang - https://youtu.be/9Z799xn2qes

►►►GEAR USED↓↓↓
Camera I Use - https://amzn.to/2JiKTQ1
Best Laptop - https://amzn.to/2XyveQy
Tripod - https://amzn.to/2xCq8YU
Cheap Cutting Mat - https://amzn.to/2G0xR7I
Pen Knife - https://amzn.to/2xvFWNh
Cutter Knife - https://amzn.to/2XvFSYv
Paper cutting scissor - https://amzn.to/2XyjQJh
A4 Paper - https://amzn.to/2FX69sy
Writing kit for kids - https://amzn.to/2FZvan7

►►► Why You Support My Work: I spent many hours for design a paper origami ideas and make a tutorial. Many adjustments were made to assure the video tutorial. Then, it takes days even take a week almost to create instructions and videos editing before the video is published on YouTube just for give new ideas.

►►►Please help me to grow my channel by: * Please keep sharing my videos always * Liking my videos if you love my hard work * Keep watching my all videos first to last. * Leave me with feedback to helping improve my channel content or anything’s. I always inspire from your feedback. I will try to respond to every single comment of videos.

►►►Thank you for watching videos ♡ Please subscribe to my channel. - https://bit.ly/2X88pUi

►►► Important: Most of paper origami videos in my tutorials are similar with others videos. But my videos are unique sometime I got inspiration from someone. So that if anyone have a complaint or copyright claim please tell me personally. I will mention that person on my video description. Also, please, contact me (with valid evidence) if you believe any of my designs was already invented by someone else. I will give credit to the inventor of the origami.

►►►Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.

subscribe=https://bit.ly/2A6bgE4

Music credit
Dream Catcher Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/by/3.0/

#Boomerang #origami #papercraft

How to make a KNEADED ERASER - DIY paccione .co.uk 2 Views • 2 years ago

Learn how to EASILY turn any solid eraser into a kneaded eraser + tips and tricks. This is my favorite type of eraser and I use it in almost all of my tutorials. Since we're all in quarantine right now, I know it may not be easy to buy, so I hope this DIY tutorial helps!

✅ MORE DIY TOOLS YOU CAN MAKE
- How to make a blending stump: https://www.youtube.com/watch?v=LmstMj8B3xk

✏️ SOLID ERASERS I TESTED IN THIS VIDEO WITH RESULTS!
Notes: I judge how good each eraser is by how well it erases (how many dabs it takes to erase something), how well it holds its shape when I mold it/when I use it to erase something. Erasers ranked as mediocre are still viable, they're just less effective to work with (eg: it may require more effort to erase with)

- Sakura Latex-Free, Non-PVC Eraser (Quick to knead. Doesn't require adhesive. Makes a great kneaded eraser.)

- PaperMate PVC-Free Eraser (Quick to knead. Doesn't need any adhesive. Makes a great kneaded eraser): https://amzn.to/2WzKNcs

- Tombow Mono Plastic Eraser (Quick to knead. Somewhat crumbly. Needs some adhesive or graphite to soften it up. Makes a great kneaded eraser. Will become stiff when it cools back down from the warmth of your fingers, so it requires kneading before use. You can use this to your advantage, though - using it as both a solid eraser and putty eraser. It can hold its shape extremely well for erasing the tiniest areas): https://amzn.to/3dru1nj

- Pentel Hi-Polymer Eraser (Quick to knead. Somewhat crumbly putty. Needs some adhesive to fix crumbliness. Makes a good kneaded eraser): https://amzn.to/35H5s26

- Dixon HB Pencil from dollarstore, latex-free (Takes some effort to knead. Not crumbly, but feels drier than all the solid erasers listed above. Works better without adhesive, but it is quite stiff. Makes a good kneaded eraser after you mix it with some graphite): https://amzn.to/2WIs92a

- Random white eraser from an old pencil case. I probably haven't used it in like 12 years (It was so stiff that it didn't even feel like rubber (It still worked anyway. I was able to quickly form it into a putty without any adhesive. Makes a good kneaded eraser)

- Paw Patrol Eraser from dollarstore (Quick to knead. Crumbly putty. Needs some adhesive. Makes a good kneaded eraser)

- PaperMate Pink Pearl Latex/PVC-Free Eraser (Extremely crumbly. Needs a lot of adhesive to become putty. Makes a mediocre kneaded eraser because it requires so much adhesive in order to be a decent putty eraser, that it can be difficult to mold into certain shapes without it sticking to my fingers and it changes shape too easily when I erase - you can observe this at the 4:13 mark. If you don't need it to erase super fine details, it will do a good job): https://amzn.to/2SMryLx

- Studio HB Pencil from dollarstore (Results were similar to the Pink Pearl eraser. Makes a mediocre kneaded eraser)

✏️ MY FAVORITE STORE-BOUGHT KNEADED ERASER
I used this for some comparison shots.
- Prismacolor Kneaded Eraser (My favorite brand. I'm not sponsored by them. A NEW kneaded eraser will need to be broken into by adding some graphite particles and kneading it well to get it to soften up): https://amzn.to/33VEnYt

⏰ SKIP TO TIMESTAMP ⏰
0:00 - Intro
0:16 - How to make a kneaded eraser
1:02 - How to make putty out of a CRUMBLY eraser
2:23 - Two methods to fix stiff/slightly crumbly putty
3:38 - Testing newly made kneaded eraser
5:14 - How to make crumbs FASTER

🔔 Subscribe for more FREE drawing tutorials: https://www.youtube.com/user/R....apidFireArt?sub_conf

🧰 MY CAMERA EQUIPMENT
Tripod: https://amzn.to/2IIIYmS
Camera and lens for Macro Closeups from the side (Sony a 5000):
https://amzn.to/3cUiUmE
https://amzn.to/2W7jk32
Lights: https://amzn.to/33fGh5R
Microphone: https://amzn.to/2xyv6cB

👕 RFA STORE:
https://teespring.com/stores/rapidfireart

📢 If you enjoyed this video, help others enjoy it by adding captions in your native language. Thank you! - http://www.youtube.com/timedtext_video?v=qWJe-bL7G94&ref=share

DISCLAIMER
This content contains affiliate links. If you decide to make a purchase through the link, I will make a small commission at no additional cost to you. This helps fund free tutorials on the RFA channel and website. Thank you for your support!